Reassembly [08/2015 - 08/2018]: Procedure
WARNING: This page is about a different car, the 2018 Toyota Sequoia, 2017 Toyota Sequoia, and 2016 Toyota Sequoia. However, it is still accessible from the selected car via links, so may be relevant.
- INSTALL OIL PUMP RELIEF VALVE
- Coat the oil pump relief valve with engine oil.
 Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
|
- Install the relief valve and relief valve spring into the oil pump cover hole.
- Install the plug.
Torque: 53 N.m (540 kgf/cm, 39 ft.lbf)
- INSTALL OIL PUMP COVER
- Install the driven rotor, drive rotor and oil pump cover with the 13 bolts.
 Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
|
Torque: 10 N.m (105 kgf/cm, 8 ft.lbf)