Removal [08/2015 - 08/2018]: Procedure
WARNING: This page is about a different car, the 2018 Toyota Sequoia, 2017 Toyota Sequoia, and 2016 Toyota Sequoia. However, it is still accessible from the selected car via links, so may be relevant.
- DRAIN ENGINE OIL
See step 1
- DRAIN ENGINE COOLANT
Refer to PROCEDURE - Step 2
- REMOVE FAN & GENERATOR V BELT
- Remove the fan and generator V belt (Refer to REMOVAL [08/2015 - 08/2018] ).
- REMOVE OIL FILTER ELEMENT
- Remove the oil filter element (Refer to REPLACEMENT [08/2015 - 08/2018] ).
- REMOVE OIL PRESSURE SENDER GAUGE ASSEMBLY
See step 2
- SEPARATE COOLER COMPRESSOR ASSEMBLY
See step 13
- REMOVE WATER BY-PASS PIPE HOSE
- REMOVE NO. 1 OIL COOLER BRACKET
- REMOVE OIL FILTER BRACKET
- REMOVE OIL COOLER ASSEMBLY
- REMOVE OIL COOLER SPACER