LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2019 >> Sequoia SR5, 4WD >> Repair and Diagnosis >> External Pages >> Different car >> Section 8 (Engine Lubrication System (3UR-FBE) (Service Information)) >> Engine Oil Cooler >> Reassembly [08/2015 - 08/2018] >> Procedure

Reassembly [08/2015 - 08/2018]: Procedure

WARNING: This page is about a different car, the 2018 Toyota Sequoia, 2017 Toyota Sequoia, and 2016 Toyota Sequoia. However, it is still accessible from the selected car via links, so may be relevant.
  1. INSTALL OIL PUMP RELIEF VALVE 
    1. GTY610778Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

      Coat the oil pump relief valve with engine oil.

    2. Install the relief valve and valve spring into the oil pump cover hole.
    3. Install a new gasket and the plug.

      Torque: 37 N.m (375 kgf/cm, 27 ft.lbf) 

scientia non olet · About LEMON Manuals