LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2019 >> Sequoia SR5, 4WD >> Repair and Diagnosis >> External Pages >> Different car >> Section 7 (Engine Control System (3UR-FBE) (Service Information)) >> Mass Air Flow Meter >> Removal [08/2015 - 08/2018] >> Procedure

Removal [08/2015 - 08/2018]: Procedure

WARNING: This page is about a different car, the 2018 Toyota Sequoia, 2017 Toyota Sequoia, and 2016 Toyota Sequoia. However, it is still accessible from the selected car via links, so may be relevant.
  1. REMOVE MASS AIR FLOW METER 
    GTY588674Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    1. Disconnect the MAF connector.
    2. Remove the 2 screws and MAF meter.
scientia non olet · About LEMON Manuals