Installation [08/2015 - 08/2018]: Procedure
WARNING: This page is about a different car, the 2018 Toyota Sequoia, 2017 Toyota Sequoia, and 2016 Toyota Sequoia. However, it is still accessible from the selected car via links, so may be relevant.
- INSTALL SPARK PLUG
- Using a 16 mm plug wrench, install the 8 spark plugs.
Torque: 21 N.m (214 kgf/cm, 15 ft.lbf)
HINT:
Perform "Inspection After Repairs" after replacing the spark plug (Refer to INITIALIZATION [08/2015 - 08/2017] , or refer to INITIALIZATION [08/2017 - 08/2018] ).
- Using a 16 mm plug wrench, install the 8 spark plugs.
- INSTALL IGNITION COIL ASSEMBLY
- Install the 8 ignition coils with the 8 bolts.
Torque: 10 N.m (102 kgf/cm, 7 ft.lbf)
HINT:
Perform "Inspection After Repairs" after replacing the ignition coil assembly (Refer to INITIALIZATION [08/2015 - 08/2017] , or refer to INITIALIZATION [08/2017 - 08/2018] ).
- Connect the 8 ignition coil connectors.
- Install the 8 ignition coils with the 8 bolts.
- INSTALL AIR CLEANER HOSE ASSEMBLY
Refer to PROCEDURE - Step 13
- INSTALL V-BANK COVER SUB-ASSEMBLY
Refer to PROCEDURE - Step 16