Basic Inspection [08/2015 - 08/2018]: Procedure
WARNING: This page is about a different car, the 2018 Toyota Sequoia, 2017 Toyota Sequoia, and 2016 Toyota Sequoia. However, it is still accessible from the selected car via links, so may be relevant.
- CHECK BATTERY VOLTAGE NOTE:
Conduct this check with the engine stopped and ignition switch off.
Result
Result Proceed to 11 V or more OK Below 11 V NG Result:
NG
CHARGE OR REPLACE BATTERY
Result:
OK
See step 2
- CHECK WHETHER ENGINE WILL CRANK
Result
Proceed to OK NG Result:
NG
PROCEED TO PROBLEM SYMPTOMS TABLE
Result:
OK
See step 3
- CHECK WHETHER ENGINE STARTS
Result
Proceed to OK NG Result:
NG
See step 6
Result:
OK
See step 4
- CHECK AIR CLEANER FILTER ELEMENT SUB-ASSEMBLY
- Visually check that the air cleaner filter sub-assembly is not excessively contaminated with dirt or oil.
Result
Proceed to OK NG
Result:
NG
REPLACE AIR CLEANER FILTER ELEMENT SUB-ASSEMBLY
Result:
OK
See step 5
- Visually check that the air cleaner filter sub-assembly is not excessively contaminated with dirt or oil.
- CHECK IDLING SPEED
Result
Proceed to OK NG Result:
NG
TROUBLESHOOT IDLING SPEED AND PROCEED TO NEXT STEP
Result:
OK
See step 6
- CHECK FUEL PRESSURE
Result
Proceed to OK NG Result:
NG
TROUBLESHOOT FUEL PRESSURE AND PROCEED TO NEXT STEP
Result:
OK
See step 7
- CHECK FOR SPARK
Result
Proceed to OK NG Result:
OK
PROCEED TO PROBLEM SYMPTOMS TABLE
Result:
NG
TROUBLESHOOT SPARK AND PROCEED TO NEXT STEP