Back Door Entry Lock and Unlock Functions do not Operate [08/2019 - ]: Description
WARNING: This page is about a different car, the 2022 Toyota Sequoia, 2021 Toyota Sequoia, and 2020 Toyota Sequoia. However, it is still accessible from the selected car via links, so may be relevant.
If the entry lock and unlock functions do not operate for the back door only, the request code may not be being transmitted from the electrical key antenna (outside luggage compartment). If the entry functions for other doors operate properly, communication between the electrical key transmitter sub-assembly and door control receiver assembly is normal. In this case, there may be a problem with request code transmission (communication between the certification ECU (smart key ECU assembly) and electrical key antenna (outside luggage compartment)), or there may be electric wave interference.