LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2019 >> Sequoia SR5, 4WD >> Repair and Diagnosis >> External Pages >> Different car >> Section 35 (Safety Connect System - Diagnostic Codes & Symptom Tests) >> Safety Connect System >> DTC B15A8-04: DCM System Internal Failure [08/2019 - ] >> Procedure

DTC B15A8-04: DCM System Internal Failure [08/2019 - ]: Procedure

WARNING: This page is about a different car, the 2022 Toyota Sequoia, 2021 Toyota Sequoia, and 2020 Toyota Sequoia. However, it is still accessible from the selected car via links, so may be relevant.
  1. REPLACE DCM (TELEMATICS TRANSCEIVER) 
    1. Replace the DCM (telematics transceiver) with a new one.

      Refer to REMOVAL [08/2019 - ]

      NOTE:
      • The engine switch must be off.
      • Do not exchange the DCM (telematics transceiver) with one from another vehicle.

      Result

      Proceed to
      NEXT

    Result: 

    NEXT 

    PERFORM DCM ACTIVATION. Refer to  DCM ACTIVATION [08/2019 - ]