Inspection [08/2015 - 08/2018]: Procedure
WARNING: This page is about a different car, the 2018 Toyota Sequoia, 2017 Toyota Sequoia, and 2016 Toyota Sequoia. However, it is still accessible from the selected car via links, so may be relevant.
- INSPECT FUEL SENDER GAUGE ASSEMBLY
- Check that the float moves smoothly between F and E.
- Measure the resistance according to the value(s) in the table below.
Standard Resistance
Tester Connection Condition Specified Condition 2 - 4 Float level is F (upper) 111 to 119 Ω Float level is E (lower) 506 to 514 Ω If the result is not as specified, replace the fuel sender gauge assembly.