Installation [08/2015 - 08/2018]: Procedure
WARNING: This page is about a different car, the 2018 Toyota Sequoia, 2017 Toyota Sequoia, and 2016 Toyota Sequoia. However, it is still accessible from the selected car via links, so may be relevant.
- INSTALL FUEL PUMP CONTROL ECU ASSEMBLY
- Install the fuel pump control ECU assembly with the 2 bolts.
 Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
|
Torque: 20 N.m (199 kgf/cm, 14 ft.lbf)
NOTE:
Do not use the fuel pump control ECU assembly if it has been subjected to physical shocks such as being dropped, etc.
- Connect the 2 fuel pump control ECU connectors.
 Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
|