LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2019 >> Sequoia SR5, 4WD >> Repair and Diagnosis >> External Pages >> Different car >> Section 22 (Engine Control System (3UR-FBE) - Diagnostic Codes (4 Of 6)) >> SFI System >> DTC P1340: Camshaft Position Sensor "A" (Bank 1 Sensor 2); DTC P1342: Camshaft Position Sensor "A" Low Input (MRE); DTC P1343: Camshaft Position Sensor "A" High Input (MRE) [08/2015 - 08/2017] >> Component Operating Range

Component Operating Range

WARNING: This page is about a different car, the 2018 Toyota Sequoia, 2017 Toyota Sequoia, and 2016 Toyota Sequoia. However, it is still accessible from the selected car via links, so may be relevant.
Camshaft position sensor signal
  • Camshaft position sensor voltage fluctuates when the camshaft rotates
  • 3 signals per revolution of crankshaft