LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2019 >> Sequoia SR5, 4WD >> Repair and Diagnosis >> External Pages >> Different car >> Section 22 (Engine Control System (3UR-FBE) - Diagnostic Codes (4 Of 6)) >> SFI System >> DTC P1340: Camshaft Position Sensor "A" (Bank 1 Sensor 2); DTC P1342: Camshaft Position Sensor "A" Low Input (MRE); DTC P1343: Camshaft Position Sensor "A" High Input (MRE) [08/2015 - 08/2017] >> Caution / Notice / Hint

Caution / Notice / Hint

WARNING: This page is about a different car, the 2018 Toyota Sequoia, 2017 Toyota Sequoia, and 2016 Toyota Sequoia. However, it is still accessible from the selected car via links, so may be relevant.

HINT: 

Read freeze frame data using the Techstream. Freeze frame data records the engine conditions when malfunctions are detected. When troubleshooting, freeze frame data can help determine if the vehicle was moving or stationary, if the engine was warmed up or not, if the air fuel ratio was lean or rich, and other data from the time the malfunction occurred.

scientia non olet · About LEMON Manuals