LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2019 >> Sequoia SR5, 4WD >> Repair and Diagnosis >> External Pages >> Different car >> Section 19 (Engine Control System (3UR-FBE) - Diagnostic Codes (6 Of 6)) >> SFI System >> DTC U0155: Lost Communication with Instrument Panel Cluster Control Module (Combination Meter) [08/2015 - 08/2018] >> Description

DTC U0155: Lost Communication with Instrument Panel Cluster Control Module (Combination Meter) [08/2015 - 08/2018]: Description

WARNING: This page is about a different car, the 2018 Toyota Sequoia, 2017 Toyota Sequoia, and 2016 Toyota Sequoia. However, it is still accessible from the selected car via links, so may be relevant.

The ECM receives signals sent from the combination meter via the CAN communication system. When DTCs indicating a CAN communication system malfunction are output, repair the CAN communication system before repairing each corresponding ECU or sensor.

DTC No. DTC Detection Condition Trouble Area
U0155
  1. Following conditions are met for 2.9 seconds (1 trip detection logic):
    1. Ignition switch to ON.
    2. Battery voltage is 10.5 V or higher.
    3. There is no communication between the ECM and combination meter.
  • CAN communication system
  • Combination meter
  • ECM
scientia non olet · About LEMON Manuals