Typical Enabling Conditions
WARNING: This page is about a different car, the 2018 Toyota Sequoia, 2017 Toyota Sequoia, and 2016 Toyota Sequoia. However, it is still accessible from the selected car via links, so may be relevant.
ALL
| Monitor runs whenever following DTCs are not stored | None |
CASE 1
| All of the following conditions are met | - |
| Battery voltage | 8 V or higher |
| Ignition switch | OFF |
| CPU clock elapsed time | 1.96608 seconds or more |
CASE 2
| All of the following conditions are met | - |
| Internal engine off timer (elapsed time from engine stop) | Less than 1800 seconds |
| Battery voltage | 8 V or higher |
| Ignition switch | ON |
| Starter | OFF |
CASE 3
| All of the following conditions are met | - |
| Internal engine off timer (elapsed time from engine stop) | 2400 seconds or more |
| Battery voltage | 8 V or higher |
| Ignition switch | ON |
| Starter | OFF |