DTC P2610: ECM / PCM Internal Engine Off Timer Performance [08/2015 - 08/2017]: Procedure
WARNING: This page is about a different car, the 2018 Toyota Sequoia, 2017 Toyota Sequoia, and 2016 Toyota Sequoia. However, it is still accessible from the selected car via links, so may be relevant.
- REPLACE ECM
- Replace the ECM (Refer to REMOVAL [08/2015 - 08/2018] ).
Result:
NEXT
See step 2
- CHECK WHETHER DTC OUTPUT RECURS
- Connect the Techstream to the DLC3.
- Turn the ignition switch to ON.
- Turn the Techstream on.
- Clear DTCs (Refer to DTC CHECK / CLEAR [08/2015 - 08/2018] ).
- Drive the vehicle in accordance with the driving pattern described in the Confirmation Driving Pattern.
- Enter the following menus: Powertrain / Engine and ECT / Trouble Codes / Pending.
- If no pending DTC is displayed, the repair has been successfully completed.
Result:
NEXT
END