LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2019 >> Sequoia SR5, 4WD >> Repair and Diagnosis >> External Pages >> Different car >> Section 16 (Engine Control System (3UR-FBE) - Diagnostic Codes (1 Of 6)) >> SFI System >> DTC P0125: Insufficient Coolant Temperature for Closed Loop Fuel Control [10/2016 - 08/2018] >> Typical Malfunction Thresholds

Typical Malfunction Thresholds

WARNING: This page is about a different car, the 2018 Toyota Sequoia, 2017 Toyota Sequoia, and 2016 Toyota Sequoia. However, it is still accessible from the selected car via links, so may be relevant.
Time until actual engine coolant temperature reaches closed loop fuel control enabling temperature 71 seconds: Engine coolant temperature at engine start is (closed-loop engine coolant temperature - 8.33°C ([15°F]) or higher)
125 seconds: Engine coolant temperature at engine start is (closed-loop engine coolant temperature - 19.44°C [35°F]) or higher, and less than (closed-loop engine coolant temperature - 8.33°C [15°F])
20 minutes: Engine coolant temperature at engine start is less than (closed-loop engine coolant temperature - 19.44°C [35°F])