Monitor Strategy
WARNING: This page is about a different car, the 2018 Toyota Sequoia, 2017 Toyota Sequoia, and 2016 Toyota Sequoia. However, it is still accessible from the selected car via links, so may be relevant.
| Related DTCs | P0125: Insufficient engine coolant temperature for closed-loop fuel control |
| Required Sensors/Components (Main) | Thermostat, cooling system |
| Required Sensors/Components (Related) | Engine coolant temperature sensor and mass air flow meter |
| Frequency of Operation | Once per driving cycle |
| Duration | 71 seconds: Engine coolant temperature at engine start is (closed-loop engine coolant temperature - 8.33°C ([15°F]) or higher) 125 seconds: Engine coolant temperature at engine start is (closed-loop engine coolant temperature - 19.44°C [35°F]) or higher, and less than (closed-loop engine coolant temperature - 8.33°C [15°F]) 20 minutes: Engine coolant temperature at engine start is less than (closed-loop engine coolant temperature - 19.44°C [35°F]) |
| MIL Operation | 2 driving cycles |
| Sequence of Operation | None |