LEMON Manuals
: Even more car manuals for everyone
Home
>>
Toyota
>>
2019
>>
Sequoia SR5, 4WD
>>
Repair and Diagnosis
>>
External Pages
>>
Different car
>>
Section 16 (Engine Control System (3UR-FBE) - Diagnostic Codes (1 Of 6))
>>
SFI System
>>
DTC P0102: Mass or Volume Air Flow Circuit Low Input; DTC P0103: Mass or Volume Air Flow Circuit High Input [08/2015 - 08/2017]
>>
Typical Enabling Conditions
Typical Enabling Conditions
WARNING:
This page is about a different car, the 2018 Toyota Sequoia, 2017 Toyota Sequoia, and 2016 Toyota Sequoia. However, it is still accessible from the selected car via links, so may be relevant.
Monitor runs whenever following DTCs not stored
None