LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2019 >> Sequoia SR5, 4WD >> Repair and Diagnosis >> External Pages >> Different car >> Section 15 (Engine Control System (3UR-FBE) - Diagnostic Codes (3 Of 6)) >> SFI System >> DTC P060B: Internal Control Module A/D Processing Performance [08/2015 - 08/2017] >> Typical Enabling Conditions

Typical Enabling Conditions

WARNING: This page is about a different car, the 2018 Toyota Sequoia, 2017 Toyota Sequoia, and 2016 Toyota Sequoia. However, it is still accessible from the selected car via links, so may be relevant.
CASE 1 AND 4

Monitor runs whenever following DTCs not present None
Both of the following conditions are met -
Battery voltage 8 V or more
Starter OFF
CASE 2 AND 3

Monitor runs whenever following DTCs not present None