LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2019 >> Sequoia SR5, 4WD >> Repair and Diagnosis >> External Pages >> Different car >> Section 15 (Engine Control System (3UR-FBE) - Diagnostic Codes (3 Of 6)) >> SFI System >> DTC P060A: Internal Control Module Monitoring Processor Performance [08/2015 - 08/2018] >> Description

DTC P060A: Internal Control Module Monitoring Processor Performance [08/2015 - 08/2018]: Description

WARNING: This page is about a different car, the 2018 Toyota Sequoia, 2017 Toyota Sequoia, and 2016 Toyota Sequoia. However, it is still accessible from the selected car via links, so may be relevant.

The main CPU and sub CPU of the ECM perform data communication between each other. The main CPU monitors the communications and WDC pulses from the sub CPU. When the signal malfunctions below are detected, a DTC is output.

DTC No. DTC Detection Condition Trouble Area
P060A When either condition below is met:
  • ECM main CPU error
  • ECM sub CPU error
  • Electronic throttle monitoring CPU error
ECM