LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2019 >> Sequoia SR5, 4WD >> Repair and Diagnosis >> External Pages >> Different car >> Section 13 (Engine Control System (3UR-FBE) - Circuit Tests) >> SFI System >> Fuel Pressure Switching System [08/2017 - 08/2018] >> Caution / Notice / Hint

Caution / Notice / Hint

WARNING: This page is about a different car, the 2018 Toyota Sequoia, 2017 Toyota Sequoia, and 2016 Toyota Sequoia. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
  • Make sure that "Alcohol Density Learning" in the Data List has been completed before performing the following troubleshooting procedures.

    When "Alcohol Density Learning" has not been completed, start the engine and drive the vehicle at 32 km/h (20 mph) or more and maintain a constant speed for 2 minutes or more.

  • Inspect the fuses for circuits related to this system before performing the following procedure.

HINT: 

The engine is difficult to start if the alcohol concentration of the fuel in the fuel tank is high. Therefore, it may be necessary to crank the engine a few times before it starts.

scientia non olet · About LEMON Manuals