LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2019 >> Sequoia SR5, 4WD >> Repair and Diagnosis >> External Pages >> Different car >> Section 11 (Emission Control System (3UR-FBE) (Service Information)) >> Fuel Tank Cap >> Inspection [08/2015 - 08/2018] >> Procedure

Inspection [08/2015 - 08/2018]: Procedure

WARNING: This page is about a different car, the 2018 Toyota Sequoia, 2017 Toyota Sequoia, and 2016 Toyota Sequoia. However, it is still accessible from the selected car via links, so may be relevant.
  1. INSPECT FUEL TANK CAP ASSEMBLY 
    1. GTY1027391Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

      Visually check that the fuel tank cap assembly and gasket are not deformed or damaged.

      If necessary, replace the fuel tank cap assembly or gasket.

      NOTE:
      GTY367876Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

      Confirm that ID mark M is printed on the replacement fuel tank cap.