LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2019 >> Sequoia SR5, 4WD >> Repair and Diagnosis >> External Pages >> Different car >> Section 1 (Safety Connect System - Diagnostics - Introduction) >> Safety Connect System >> Initialization [08/2019 - ] >> Initialization [08/2019 - ]

Initialization [08/2019 - ]

WARNING: This page is about a different car, the 2022 Toyota Sequoia, 2021 Toyota Sequoia, and 2020 Toyota Sequoia. However, it is still accessible from the selected car via links, so may be relevant.
  1. RESET BACK-UP BATTERY CONDITION 

    HINT: 

    If the back-up battery (mobilephone battery) has been replaced, it is necessary to perform the Reset Backup Battery Condition procedure.

    1. Connect the Techstream to the DLC3.
    2. Turn the engine switch on (IG).
    3. Turn the Techstream on.
    4. Choose "Telematics" from the System Selection Menu, and then click "Utility".
    5. Click "Backup Battery Replacement Reset" on the Utility Selection Menu.
    6. According to the display on the Techstream, perform Backup Battery Replacement Reset to reset the mobilephone battery replacement flag.
scientia non olet · About LEMON Manuals