Customize Parameters [08/2019 - ]
WARNING: This page is about a different car, the 2022 Toyota Sequoia, 2021 Toyota Sequoia, and 2020 Toyota Sequoia. However, it is still accessible from the selected car via links, so may be relevant.
- CUSTOMIZE TELEMATICS SYSTEM
- Customizing with the Techstream.NOTE:
- When the customer requests a change in a function, first make sure that the function can be customized.
- Be sure to make a note of the current settings before customizing.
- When troubleshooting a function, first make sure that the function is set to the default setting.
- Connect the Techstream to the DLC3.
- Turn the engine switch on (IG).
- Turn the Techstream on.
- Enter the following menus: Customize Setting / Others.
- Select the setting by referring to the table below.OTHER
Display Description Default Setting ECU Telematics Microphone Volume Adjust Sets the telephone microphone assembly volume 6 1(MIN)/2/3/4/5/6/7/8/9/10/11(MAX) DCM (telematics transceiver) Telematics Speaker Volume Adjust Sets the telephone microphone assembly volume 8 1(MIN)/2/3/4/5/6/7/8/9/10/11/12/13/14(MAX) DCM (telematics transceiver)
- Customizing with the Techstream.