Tachometer Malfunction [08/2015 - 08/2018]: Procedure

1. Use the Techstream to check if the CAN communication system is functioning normally (Refer to DTC CHECK / CLEAR [08/2015 - 08/2019] ).
   RESULT
   
   

   Result	Proceed to
   CAN communication system DTC is not output	A
   CAN communication system DTC is output	B

Result: 

B 

GO TO CAN COMMUNICATION SYSTEM 

(Refer to PRECAUTION [08/2015 - 08/2017] , or refer to PRECAUTION [08/2017 - ] )

Result: 

A 

See step  2

1. Connect the Techstream to the DLC3.
2. Turn the ignition switch to ON.
3. Turn the Techstream ON.
4. Enter the following menus: Body Electrical / Combination Meter / Active Test.
5. According to the display on the Techstream, perform the Active Test.
   COMBINATION METER
   
   

   Tester Display	Test Part	Control Range	Diagnostic Note
   Tacho Meter Operation	Tachometer	0, 1000, 2000, 3000, 4000, 5000, 6000 or 7000	-

   OK

   Needle indication is normal.

   HINT: 

   Confirm that the vehicle is stopped and engine idling.

Result: 

NG 

REPLACE COMBINATION METER ASSEMBLY 

(Refer to REMOVAL [08/2015 - 08/2017] , or refer to REMOVAL [08/2017 - ] )

Result: 

OK 

See step  3

1. Connect the Techstream to the DLC3.
2. Turn the ignition switch to ON.
3. Turn the Techstream ON.
4. Enter the following menus: Body Electrical / Combination Meter / Data List.
5. According to the display on the Techstream, read the Data List.
   COMBINATION METER
   
   

   Tester Display	Measurement Item/Range	Normal Condition	Diagnostic Note
   Engine Rpm	Engine speed/Min.: 0, Max.: 12750	Idling: 650 to 750	Unit: rpm

   OK

   Engine speed displayed on the Techstream is almost the same as that of the tachometer reading.

Result: 

OK 

REPLACE COMBINATION METER ASSEMBLY 

(Refer to REMOVAL [08/2015 - 08/2017] , or refer to REMOVAL [08/2017 - ] )

Result: 

NG 

See step  4

1. Connect the Techstream to the DLC3.
2. Turn the ignition switch to ON.
3. Turn the Techstream ON.
4. Enter the following menus: Powertrain / Engine / Data List.
5. According to the display on the Techstream, read the Data List.
   ENGINE
   
   

   Tester Display	Measurement Item/Range	Normal Condition	Diagnostic Note
   Engine Speed	Engine speed/Min.: 0, Max.: 16838	Idling: 650 to 750	Unit: rpm

   OK

   Engine speed displayed on the Techstream is almost the same as that of the tachometer reading.

   RESULT
   
   

   Result	Proceed to
   Engine speed displayed on the Techstream is almost same as actual engine speed	A
   Engine speed displayed on the Techstream is not same as actual engine speed (for 3UR-FE)	B
   Engine speed displayed on the Techstream is not same as actual engine speed (for 3UR-FBE)	C

Result: 

A 

REPLACE COMBINATION METER ASSEMBLY 

(Refer to REMOVAL [08/2015 - 08/2017] , or refer to REMOVAL [08/2017 - ] )

Result: 

B 

GO TO PROBLEM SYMPTOMS TABLE 

(Refer to PROBLEM SYMPTOMS TABLE [08/2015 - 08/2017] , or refer to PROBLEM SYMPTOMS TABLE [08/2017 - 08/2018] )

Result: 

C 

GO TO PROBLEM SYMPTOMS TABLE 

(Refer to PROBLEM SYMPTOMS TABLE [08/2015 - 08/2017] , or refer to PROBLEM SYMPTOMS TABLE [08/2017 - 08/2018] )