LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2019 >> Sequoia SR5, 4WD >> Repair and Diagnosis >> Drivelines & Axles >> Axle Shafts >> Drive Axle Shaft / Propeller Shaft (Service Information) >> PROPELLER SHAFT ASSEMBLY (for 4WD) >> Removal [08/2015 - ] >> Procedure

Removal [08/2015 - ]: Procedure

  1. REMOVE PROPELLER SHAFT HEAT INSULATOR 
    1. Remove the 2 bolts and propeller shaft heat insulator.
      GTY610859Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  2. REMOVE TRANSFER HEAT INSULATOR 
    1. Remove the 3 bolts and transfer heat insulator.
      GTY598089Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  3. REMOVE PROPELLER SHAFT ASSEMBLY 
    1. Place matchmarks on the propeller shaft flange and differential flange.
      GTY588354Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    2. Place matchmarks on the propeller shaft flange and transfer flange.
    3. Remove the 8 nuts and then remove the propeller shaft assembly.
scientia non olet · About LEMON Manuals