LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2019 >> Sequoia SR5, 4WD >> Repair and Diagnosis >> Drivelines & Axles >> Axle Shafts >> Drive Axle Shaft / Propeller Shaft (Service Information) >> Front Propeller Shaft Assembly >> Removal [08/2015 - ] >> Procedure

Removal [08/2015 - ]: Procedure

  1. REMOVE PROPELLER SHAFT HEAT INSULATOR 
    1. Remove the 2 bolts and heat insulator from the heat insulator bracket.
      GTY598087Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  2. REMOVE FRONT PROPELLER SHAFT ASSEMBLY 
    1. Place matchmarks on the differential and propeller shaft flange.
      GTY601614Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    2. Place matchmarks on the transfer and propeller shaft flanges.
    3. Remove the 8 nuts and 8 washers and remove the front propeller shaft assembly.
scientia non olet · About LEMON Manuals