LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2019 >> Sequoia SR5, 4WD >> Repair and Diagnosis >> Brakes >> Mechanical - Hydraulic >> Brake System (Hydraulic) (Service Information) >> Brake Master Cylinder >> Reassembly [08/2015 - ] >> Procedure

Reassembly [08/2015 - ]: Procedure

  1. INSTALL MASTER CYLINDER RESERVOIR GROMMET 
    1. Apply a light coat of lithium soap base glycol grease to the 2 new grommets and install them onto the master cylinder body.
  2. INSTALL BRAKE MASTER CYLINDER RESERVOIR SUB-ASSEMBLY 
    1. Install the master cylinder reservoir onto the master cylinder body.
    2. Using a T25 "TORX" socket wrench, install the screw.
      GTY202836Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

      Torque: 5.5 N.m (56 kgf/cm, 49 in.*lbf) 

scientia non olet · About LEMON Manuals