Television Display does not Turn ON [08/2015 - 08/2019]: Procedure
- CLEAN INFRARED RAY RECEIVING PORTION
- Clean the infrared ray receiving portion on the television display assembly.
- Check whether the same malfunction occurs.
OK
The function returns to normal.
Result:
OK
END
Result:
NG
See step 2
- Clean the infrared ray receiving portion on the television display assembly.
- CHECK REAR SWITCH AND VOLUME ASSEMBLY (DRY-CELL BATTERY)
- Check that the dry-cell battery of the rear switch and volume assembly is not depleted.
OK
Battery is not depleted.
Result:
NG
REPLACE REAR SWITCH AND VOLUME ASSEMBLY (DRY-CELL BATTERY)
Result:
OK
See step 3
- Check that the dry-cell battery of the rear switch and volume assembly is not depleted.
- CHECK REAR SWITCH AND VOLUME ASSEMBLY
- Temporarily replace the rear switch and volume assembly with a new or known good one.
- Check that the television display assembly turns on.
OK
The television display assembly turns on.
Result:
OK
END (REAR SWITCH AND VOLUME ASSEMBLY WAS DEFECTIVE)
Result:
NG
REPLACE TELEVISION DISPLAY ASSEMBLY
(Refer to REMOVAL [08/2015 - 08/2019] )