DTC U023A: Lost Communication With Image Processing Module "A" [08/2017 - ]: Procedure

1. Clear the DTCs.

   Refer to DTC CHECK / CLEAR [08/2017 - 08/2019] Refer to DTC CHECK / CLEAR [08/2019 - ]

2. Check for DTCs.

   Refer to DTC CHECK / CLEAR [08/2017 - 08/2019] Refer to DTC CHECK / CLEAR [08/2019 - ]

   OK

   DTC U023A is not output.

   Result

   Proceed to
   OK
   NG

Result: 

OK 

USE SIMULATION METHOD TO CHECK. Refer to  HOW TO PROCEED WITH TROUBLESHOOTING [08/2017 - 08/2018]  Refer to  HOW TO PROCEED WITH TROUBLESHOOTING [08/2018 - 08/2019]  Refer to  HOW TO PROCEED WITH TROUBLESHOOTING [08/2019 - ] 

Result: 

NG 

GO TO CAN COMMUNICATION SYSTEM. Refer to  HOW TO PROCEED WITH TROUBLESHOOTING [08/2017 - 08/2019]  Refer to  HOW TO PROCEED WITH TROUBLESHOOTING [08/2019 - ]