How To Proceed With Troubleshooting [08/2015 - 08/2017]: Procedure
- VEHICLE BROUGHT TO WORKSHOP
Result
Proceed to NEXT Result:
NEXT
See step 2
- INSPECT BATTERY VOLTAGE
Standard voltage
11 to 14 V
If the voltage is below 11 V, recharge or replace the battery before proceeding.
Result
Proceed to NEXT Result:
NEXT
See step 3
- PROBLEM SYMPTOMS TABLE
- Refer to Problem Symptoms Table.
Refer to PROBLEM SYMPTOMS TABLE [08/2015 - 08/2017]
Result
Result Proceed to Fault is not listed in Problem Symptoms Table A Fault is listed in Problem Symptoms Table B
Result:
B
See step 5
Result:
A
See step 4
- Refer to Problem Symptoms Table.
- OVERALL ANALYSIS AND TROUBLESHOOTING
- Terminals of ECU
Refer to TERMINALS OF ECU [08/2015 - 08/2017]
Result
Proceed to NEXT
Result:
NEXT
See step 5
- Terminals of ECU
- ADJUST, REPAIR OR REPLACE
Result
Proceed to NEXT Result:
NEXT
See step 6
- CONFIRMATION TEST
Result
Proceed to NEXT Result:
NEXT
END