Removal [11/2018 - 08/2020]: Procedure
- REMOVE NO. 1 ENGINE COVER SUB-ASSEMBLY
Refer to PROCEDURE - Step 20 [11/2018 - 10/2019] , or refer to PROCEDURE - Step 20 [10/2019 - 08/2020]
- REMOVE IGNITION COIL ASSEMBLY
Refer to PROCEDURE - Step 2
- REMOVE SPARK PLUG
- Remove the 4 spark plugs from the cylinder head sub-assembly.NOTE:
If a spark plug has been struck or dropped, replace it.
- Remove the 4 spark plugs from the cylinder head sub-assembly.