LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2019 >> RAV4 XLE, FWD >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 93 (Grille Shutter System (HV) - Diagnostics - Introduction) >> GRILLE SHUTTER SYSTEM (for HV Model) >> System Description [02/2019 - 12/2021] >> System Description [02/2019 - 12/2021]

System Description [02/2019 - 12/2021]

WARNING: This page is about a different variant/trim than selected.
  1. GRILLE SHUTTER SYSTEM 
    1. General description

      The swing grille actuator assembly receives signals from the ECM, hybrid vehicle control ECU assembly and air conditioning amplifier assembly via CAN communication. Based on these signals, the swing grille actuator assembly operates the radiator shutter sub-assembly.

      If a malfunction occurs in the grille shutter system, a warning will be displayed on the multi-information display and grille shutter system operation will be disabled.

    2. Control List
      Control Description
      Closing Operation Control The grille shutter closes when certain conditions related to the vehicle speed, engine coolant temperature, inverter coolant temperature, ambient temperature and refrigerant pressure are met.
      Opening Operation Control The grille shutter opens when certain conditions related to the vehicle speed, engine coolant temperature, inverter coolant temperature, ambient temperature and refrigerant pressure are met.
      Ignition Switch Off-linked Opening Operation Control Opens the grille shutter when the ignition switch is turned off in order to prevent the grille shutter from becoming stuck closed while the vehicle is stopped.