LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2019 >> RAV4 XLE, FWD >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 83 (Can Communication System (HV) - Diagnostics - Introduction (22 Of 25)) >> CAN COMMUNICATION SYSTEM (for HV Model) >> DTC Check / Clear [02/2019 - 10/2022] >> DTC Check / Clear [02/2019 - 10/2022]

DTC Check / Clear [02/2019 - 10/2022]

WARNING: This page is about a different variant/trim than selected.
  1. CHECK FOR DTC 
    1. Connect the Techstream to the DLC3.
    2. Turn the ignition switch to ON.
    3. Turn the Techstream on.
    4. Enter the following menus: Body Electrical / Central Gateway / Trouble Codes.

      Body Electrical > Central Gateway > Trouble Codes 

    5. Read the DTCs.
  2. CLEAR DTC 
    1. Connect the Techstream to the DLC3.
    2. Turn the ignition switch to ON.
    3. Turn the Techstream on.
    4. Enter the following menus: Body Electrical / Central Gateway / Trouble Codes.

      Body Electrical > Central Gateway > Trouble Codes 

    5. Clear the DTCs.

      Body Electrical > Central Gateway > Clear DTCs 

scientia non olet · About LEMON Manuals