Inspection [06/2020 - ]: Procedure
WARNING: This page is about a different variant/trim than selected.
- INSPECT ELECTRIC VEHICLE BATTERY PLUG ASSEMBLY
- Measure the resistance according to the value(s) in the table below.
Standard Resistance
| Tester Connection |
Condition |
Specified Condition |
| A - C |
Always |
Below 1 Ω |
| B - D |
Below 1 Ω |
If the result is not as specified, replace the electric vehicle battery plug assembly.
 Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
|