DTC P0AFC-62: Hybrid/EV Battery Sensor Module Signal Compare Failure [06/2020 - ]: Description
WARNING: This page is about a different variant/trim than selected.
Refer to the description for DTC P1AC0-00.
Refer to DESCRIPTION
| DTC No. | Detection Item | DTC Detection Condition | Trouble Area | MIL | Warning Indicate |
|---|---|---|---|---|---|
| P0AFC-62 | Hybrid/EV Battery Sensor Module Signal Compare Failure | The difference between the voltage output by detection circuit C and the total of the voltage output by detection circuits A and B exceeds the threshold. HINT: The battery voltage sensor uses 3 voltage detection circuits (A, B and C) to detect the voltage of the battery blocks. (1 trip detection logic) |
Battery voltage sensor | Comes on | Master Warning: Comes on |