Blower Motor does not Operate [11/2018 - 02/2019]: Description
WARNING: This page is about a different variant/trim than selected.
If no air is discharged even when the air conditioning control assembly is operated, the following causes are possible.
| Malfunction Status |
Factor |
| No air is discharged |
- Blower with fan motor sub-assembly malfunction (+B and GND circuit)
- Control signal malfunction between air conditioning assembly and blower with fan motor sub-assembly
- Blower with fan motor sub-assembly malfunction
- Air conditioning control assembly malfunction
- Warm-up control
- Water temperature sensor malfunction
|