LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2019 >> RAV4 XLE, FWD >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 4 (Hybrid Battery Control System - Service Information (5 Of 7)) >> Sub Radiator >> Removal [11/2018 - 02/2019] >> Procedure

Removal [11/2018 - 02/2019]: Procedure

WARNING: This page is about a different variant/trim than selected.
  1. DRAIN COOLANT (for Inverter) 

    Refer to PROCEDURE - Step 1

  2. REMOVE UPPER RADIATOR SUPPORT SUB-ASSEMBLY 

    Refer to REMOVAL [11/2018 - 02/2019]

  3. REMOVE RADIATOR ASSEMBLY (for Inverter Coolant) 
    1. Slide the 2 hose clips and disconnect the No. 3 inverter cooling hose and No. 4 inverter cooling hose from the radiator assembly.
      GTY918750Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
      *1 No. 3 Inverter Cooling Hose
      *2 No. 4 Inverter Cooling Hose
    2. Remove the 4 bolts.
      GTY844216Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    3. Detach the 2 claws and remove the radiator assembly.
      NOTE:
      • Put pieces of cloth into the pipes and disconnected hoses or cover the pipes and hoses with plastic bags to prevent foreign matter from entering the radiator assembly and cooling system.
      • Do not apply excessive force to the No. 3 inverter cooling hose and No. 4 inverter cooling hose.
scientia non olet · About LEMON Manuals