LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2019 >> RAV4 XLE, FWD >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 120 (Fuel System (A25A-FXS) - Service Information (2 Of 2)) >> FUEL PUMP (w/o Canister Pump Module) >> Disassembly [11/2018 - 08/2020] >> Procedure

Disassembly [11/2018 - 08/2020]: Procedure

WARNING: This page is about a different variant/trim than selected.
  1. REMOVE FUEL SENDER GAUGE ASSEMBLY 

    See step  7

  2. REMOVE FUEL PUMP 
    1. Detach the 4 claws and disconnect the sub-assembly support from the fuel sub-tank sub-assembly.
      GTY914873Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    2. Disconnect the connector from the fuel pump.
      GTY914882Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    3. Detach the 3 claws and remove the No. 1 cap from the sub-assembly support.
      GTY914881Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    4. Remove the fuel pump from the sub-assembly support.
      GTY848647Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    5. Remove the O-ring from the fuel pump.
      GTY914879Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
scientia non olet · About LEMON Manuals