LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2019 >> RAV4 XLE, FWD >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 120 (Fuel System (A25A-FXS) - Service Information (2 Of 2)) >> FUEL PUMP (w/ Canister Pump Module) >> Disassembly [02/2019 - ] >> Procedure

Disassembly [02/2019 - ]: Procedure

WARNING: This page is about a different variant/trim than selected.
  1. REMOVE FUEL SENDER GAUGE ASSEMBLY 

    See step  7 [02/2019 - 08/2020], or see step  7 [08/2020 - 12/2021], or see step  7 [12/2021 - 10/2022], or see step  7 [10/2022 - 10/2023], or see step  7 [10/2023 - ]

  2. REMOVE FUEL PUMP 
    1. Detach the 4 claws and disconnect the sub-assembly support from the fuel sub-tank sub-assembly.
      GTY848627Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    2. Disconnect the connector from the fuel pump.
      GTY848628Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    3. Detach the 3 claws and remove the No. 1 cap from the sub-assembly support.
      GTY848638Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    4. Remove the fuel pump from the sub-assembly support.
      GTY928493Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    5. Remove the O-ring from the sub-assembly support.
      GTY848639Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    6. Remove the spacer from the fuel pump.
scientia non olet · About LEMON Manuals