LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2019 >> RAV4 XLE, FWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 56 (Hybrid Battery System (Lithium-Ion Battery) - Diagnostic Codes (2 Of 3)) >> HYBRID BATTERY SYSTEM (for LITHIUM-ION BATTERY) >> DTC P0ABF-28: Hybrid/EV Battery Current Sensor "A" Signal Bias Level Out of Range / Zero Adjustment Failure [06/2020 - ] >> Description

DTC P0ABF-28: Hybrid/EV Battery Current Sensor "A" Signal Bias Level Out of Range / Zero Adjustment Failure [06/2020 - ]: Description

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2025 Toyota RAV4, 2024 Toyota RAV4, 2023 Toyota RAV4, 2022 Toyota RAV4, and 2021 Toyota RAV4. However, it is still accessible from the selected car via links, so may be relevant.

Refer to the description for DTC P0ABF-11.

Refer to DESCRIPTION 

DTC No. Detection Item DTC Detection Condition Trouble Area MIL Warning Indicate
P0ABF-28 Hybrid/EV Battery Current Sensor "A" Signal Bias Level Out of Range / Zero Adjustment Failure The offset value of the battery current sensor is excessively large.
(1 trip detection logic)
  • HV battery junction block assembly
  • Battery ECU assembly
  • No. 1 HV supply stack sub-assembly
  • No. 2 HV supply stack sub-assembly
Comes on Master Warning:
Comes on
RELATED DATA LIST

DTC No. Data List
P0ABF-28 Hybrid/EV Battery Current

HINT: