LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2019 >> RAV4 XLE, FWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 38 (Engine Control System (A25A-FKS) - Diagnostic Codes (6 Of 9)) >> SFI System >> DTC P0606-09: Control Module Processor (Brake Override System Output Signal) Component Failure [12/2021 - ] >> Description

DTC P0606-09: Control Module Processor (Brake Override System Output Signal) Component Failure [12/2021 - ]: Description

WARNING: This page is about a different car, the 2025 Toyota RAV4, 2024 Toyota RAV4, 2023 Toyota RAV4, 2022 Toyota RAV4, and 2021 Toyota RAV4. However, it is still accessible from the selected car via links, so may be relevant.

The ECM calculates and compares the accelerator opening angle command value used for control and the value used for monitoring, after corrected by the brake override system.

DTC No. Detection Item DTC Detection Condition Trouble Area MIL Memory Note
P0606-09 Control Module Processor (Brake Override System Output Signal) Component Failure Output of the accelerator opening command value after corrected by the brake override system used for control is more excessive than that of the accelerator opening angle command value after corrected by the brake override system repairs used for monitoring (1 trip detection logic). ECM Comes on DTC stored
  • SAE Code: P0606
  • DTC for Mexico Models: Applies