Typical Enabling Conditions
WARNING: This page is about a different car, the 2025 Toyota RAV4, 2024 Toyota RAV4, 2023 Toyota RAV4, 2022 Toyota RAV4, and 2021 Toyota RAV4. However, it is still accessible from the selected car via links, so may be relevant.
| All of the following conditions are met | - |
| Ignition switch | Off |
| Engine | Stall |
| Soak time | 6, 6.5 and 7 hours |
| Time after ECM power on | 0.5 seconds or more |
| One of the following conditions is met | (a) or (b) |
| (a) Engine control module internal temperature | -10°C (14°F) or higher |
| (b) Intake air temperature | -10°C (14°F) or higher |
| Engine control module internal temperature sensor circuit fail (P06AD, P06AE) | Not detected |
| Intake air temperature sensor circuit fail (P0112, P0113) | Not detected |
| Soak timer fail (P2610) | Not detected |
| Auxiliary battery voltage | 8 V or higher |