Typical Enabling Conditions
WARNING: This page is about a different car, the 2025 Toyota RAV4, 2024 Toyota RAV4, 2023 Toyota RAV4, 2022 Toyota RAV4, and 2021 Toyota RAV4. However, it is still accessible from the selected car via links, so may be relevant.
ALL
| Monitor runs whenever the following DTCs are not stored | None |
CASE 1
| All of the following conditions are met | - |
| Fault Code | Not stored |
| OBDII system commands | Store |
| Auxiliary battery voltage | 8 V or higher |
CASE 2
| All of the following conditions are met | - |
| Fault Code | Stored |
| OBDII system commands | Clear |
| Auxiliary battery voltage | 8 V or higher |
CASE 3
| Auxiliary battery voltage | 8 V or higher |