LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2019 >> RAV4 XLE, FWD >> Repair and Diagnosis >> Body & Frame >> Exterior Body Panels >> (Door / Hatch) - Service Information (1 Of 4) >> Hood >> Disassembly [11/2018 - 10/2019] >> Procedure

Disassembly [11/2018 - 10/2019]: Procedure

  1. REMOVE HOOD INSULATOR (w/ Hood Insulator) 
    1. Using a clip remover, remove the 6 clips.
      GTY878723Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    2. Detach the guide and remove the hood insulator.
  2. REMOVE WASHER NOZZLE SUB-ASSEMBLY 

    HINT: 

    Use the same procedure for the RH and LH sides.

    Refer to PROCEDURE - Step 2

  3. DISCONNECT WINDSHIELD WASHER HOSE 
    1. Detach the clamp and disconnect the windshield washer hose.
      GTY878722Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  4. REMOVE HOOD STAY HOLDER 
    1. Using a thin-bladed screwdriver, detach the claw and remove the hood stay holder.
      GTY878708Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

      HINT: 

      Tape the thin-bladed screwdriver tip before use.

scientia non olet · About LEMON Manuals