Installation [11/2018 - ]: Procedure

1. Connect a new washer nozzle sub-assembly to the washer hose.

   Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

   HINT: 

   Insert washer hose to joint all the way.

2. Attach the claw as indicated by the arrows, in the order shown in the illustration to install the washer nozzle sub-assembly.

   Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

   	Install in this Direction (1)
   	Install in this Direction (2)

Refer to PROCEDURE - Step 4 [11/2018 - 10/2019] , or refer to PROCEDURE - Step 4 [10/2019 - ]

Refer to ON-VEHICLE INSPECTION [11/2018 - ] 

Refer to ADJUSTMENT [11/2018 - ]