Typical Malfunction Thresholds

ON malfunction 

1. Any of the following conditions are met: ON malfunction (A), (B), (C), (D), (E), (F), (G), (H), (I), (J), (K), (L), (M), (N), (O), (P), (Q), (R) or (S)
   ON MALFUNCTION (A)
   
   

   Summation of clutch heat generations at 1st gear (J1summax)

   Specified value

   ON MALFUNCTION (B)
   
   

   Summation of clutch heat generations at 2nd gear (J2summax)

   Specified value

   ON MALFUNCTION (C)
   
   

   Summation of clutch heat generations at 3rd gear (J3summax)

   Specified value

   ON MALFUNCTION (D)
   
   

   Summation of clutch heat generations at 4th gear (J4summax)

   Specified value

   ON MALFUNCTION (E)
   
   

   Summation of clutch heat generations at 5th gear (J5summax)

   Specified value

   ON MALFUNCTION (F)
   
   

   Summation of clutch heat generations at 6th gear (J6summax)

   Specified value

   ON MALFUNCTION (G)
   
   

   Summation of clutch heat generations at 7th gear (J7summax)

   Specified value

   ON MALFUNCTION (H)
   
   

   Summation of clutch heat generations at 8th gear (J8summax)

   Specified value

   ON MALFUNCTION (I)
   
   

   Solenoid (SL1) valve

   ON malfunction

   ON MALFUNCTION (J) AND (K)
   
   

   Solenoid (SL3) valve

   ON malfunction

   ON MALFUNCTION (L)
   
   

   Solenoid (SL4) valve

   ON malfunction

   ON MALFUNCTION (M)
   
   

   Solenoid (SLU) valve

   OFF malfunction

   ON MALFUNCTION (N), (O), (P), (Q), (R) AND (S)
   
   

   Neutral state flag

   ON

OFF malfunction 

1. Any of the following conditions are met	(a) or (b)
   (a) Turbine speed/Output speed (NT/NO)	1.129 or more and 1.308 or less (When output speed less than 570 rpm)
   (b) Turbine speed - Output speed x 5th gear ratio	-50 rpm or more and 50 rpm or less (When output speed 570 rpm or more)

HINT: