Problem Symptoms Table [02/2019 - ]
WARNING: This page is about a different variant/trim than selected.
HINT:
- Use the table below to help determine the cause of problem symptoms. If multiple suspected areas are listed, the potential causes of the symptoms are listed in order of probability in the "Suspected Area" column of the table. Check each symptom by checking the suspected areas in the order they are listed. Replace parts as necessary.
- Inspect the fuses and relays related to this system before inspecting the suspected areas below.
IMMOBILISER SYSTEM (W/O SMART KEY SYSTEM)
| Symptom | Suspected Area | Link |
|---|---|---|
| Hybrid control system does not start but initial combustion occurs | Proceed to "Power Source Mode does not Change to ON (READY)" | Refer to Power Source Mode does not Change to ON (READY) [02/2019 - 06/2020] , or refer to Power Source Mode does not Change to ON (READY) [06/2020 - ] |
| Security indicator light does not blink | Proceed to "Security Indicator Light Does not Blink" | Refer to Security Indicator Light Does not Blink [02/2019 - 10/2022] , or refer to Security Indicator Light Does not Blink [10/2022 - 10/2023] , or refer to Security Indicator Light Does not Blink [10/2023 - 11/2024] , or refer to Security Indicator Light Does not Blink [11/2024 - ] |
| Key cannot be registered | Proceed to "Key Cannot be Registered" | Refer to Key Cannot be Registered [02/2019 - 10/2022] , or refer to Key Cannot be Registered [10/2022 - ] |