LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2019 >> RAV4 LE, FWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 45 (Hybrid Control System (Lithium-Ion Battery) - Diagnostic Codes (6 Of 6) & Circuit Tests (1 Of 2)) >> HYBRID CONTROL SYSTEM (for LITHIUM-ION BATTERY) >> Pattern Select Switch EV Mode Circuit [06/2020 - ] >> Description

Pattern Select Switch EV Mode Circuit [06/2020 - ]: Description

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2025 Toyota RAV4, 2024 Toyota RAV4, 2023 Toyota RAV4, 2022 Toyota RAV4, and 2021 Toyota RAV4. However, it is still accessible from the selected car via links, so may be relevant.

The EV mode signal will be sent to the hybrid vehicle control ECU assembly when the EV mode switch (integration control and panel assembly) is operated. If the specified conditions are met, the system enters EV mode and the vehicle will be driven using EV mode. This signal is then transmitted from the hybrid vehicle control ECU assembly via CAN to the combination meter assembly to illuminate the EV mode indicator.

scientia non olet · About LEMON Manuals