Caution / Notice / Hint
NOTE:
- When replacing the skid control ECU (brake booster with master cylinder assembly), perform initialization and calibration of the linear solenoid valve.
Refer to UTILITY [02/2019 - 12/2021]
- Inspect the fuses for circuits related to this system before performing the following procedure.
- If the certification ECU (smart key ECU assembly) is replaced, refer to Registration.
Refer to REGISTRATION [11/2018 - 10/2019]
HINT:
When C1249 is output together with C1380, inspect and repair the trouble areas indicated by C1249 first.
Refer to DTC C1249: Open Circuit in Stop Light Switch Circuit [02/2019 - 12/2021]